Tepha, Inc.

Resorbable implants, coverings and receptacles comprising poly(butylene succinate) and copolymers thereof have been developed. The implants are preferably sterilized, and contain less than 20 endotoxin units per device as determined by the limulus amebocyte lysate (LAL) assay, and are particularly suitable for use in procedures where prolonged strength retention is necessary, and can include one or more bioactive agents. The implants may be made from fibers and meshes of poly(butylene succinate) and copolymers thereof, or by 3d printing molding, pultrusion or other melt or solvent processing method. The implants, or the fibers preset therein, may be oriented. These coverings and receptacles may be used to hold, or partially/fully cover, devices such as pacemakers and neurostimulators. The coverings, receptacles and implants described herein, may be made from meshes, webs, lattices, non-wovens, films, fibers, foams, molded, pultruded, machined and 3D printed forms.

Resorbable implants comprising poly(butylene succinate) and copolymers thereof have been developed. The implants implants are preferably sterilized, and contain less than 20 endotoxin units per device as determined by the limulus amebocyte lysate (LAL) assay, and are particularly suitable for use in procedures where prolonged strength retention is necessary, and can include one or more bioactive agents. The implants may be made from fibers and meshes of poly(butylene succinate) and copolymers thereof, or by 3d printing, and the fibers may be oriented. Coverings and receptacles made from forms of poly(butylene succinate) and copolymers thereof have also been developed for use with cardiac rhythm management devices and other implantable devices. These coverings and receptacles may be used to hold, or partially/fully cover, devices such as pacemakers and neurostimulators. The coverings and receptacles are made from meshes, webs, lattices, non-wovens, films, fibers, and foams, and contain antibiotics such as rifampin and minocycline.

Nonwoven resorbable pouches that at least partially enclose implantable medical devices and improved methods for producing the implantable medical device pouches are described. The nonwoven pouches may comprise one or more drugs. Implantable medical devices that are placed in the pouches prior to implantation are prevented from migrating from the site of implantation by tissue ingrowth into the pouch. Antibiotics may be incorporated into the pouches to prevent post-operative infections. The pouches may be formed in fewer steps than conventional pouches, and without polymer coatings. Nonwoven pouches can be formed in one step by dry spinning instead of using multiple processing steps. In embodiments, the nonwoven pouches are smoother on the inside than the outside to tightly fit the implantable medical devices internally while encouraging external tissue ingrowth. In embodiments, the nonwoven pouches eliminate the use of knitted or woven multifilament fibers that can trap bacteria and result in post-operative infection.

Nonwoven resorbable pouches that at least partially enclose implantable medical devices and improved methods for producing the implantable medical device pouches are described. The nonwoven pouches may comprise one or more drugs. Implantable medical devices that are placed in the pouches prior to implantation are prevented from migrating from the site of implantation by tissue ingrowth into the pouch. Antibiotics may be incorporated into the pouches to prevent post-operative infections. The pouches may be formed in fewer steps than conventional pouches, and without polymer coatings. Nonwoven pouches can be formed in one step by dry spinning instead of using multiple processing steps. In embodiments, the nonwoven pouches are smoother on the inside than the outside to tightly fit the implantable medical devices internally while encouraging external tissue ingrowth. In embodiments, the nonwoven pouches eliminate the use of knitted or woven multifilament fibers that can trap bacteria and result in post-operative infection.

Methods to fabricate objects by 3D printing of poly-4-hydroxybutyrate (P4HIB) and copolymers thereof have been developed. In one method, these objects are produced by continuous fused filament fabrication using an apparatus and conditions that overcome the problems of poor feeding of the filament resulting from the low softening temperature of the filament and heat creep along the fed filament. Methods using an apparatus including a heat sink, a melt tube, a heating block and nozzle, and a transition zone between the heat sink and heating block, with the melt tube extending through the heat sink, transition zone, and heat block to the nozzle are disclosed. 3D objects are also printed by fused pellet deposition (FPD), melt extrusion deposition (MED), selective laser melting (SLM), printing of slurries and solutions using a coagulation bath, and printing using a binding solution and polymer granules.

Implants with fillable reservoirs have been developed that are suitable for rhinoplasty, breast reconstruction, ear reconstruction, and replacement, reconstruction or repair of other soft tissues. The implants can be filled with graft material prior to implantation. The implants are preferably made from resorbable polymers, can be tailored to provide different geometries, mechanical properties and resorption rates in order to provide more consistent surgical outcomes. The implants preferably have an interconnected network of unit cells with microporous outer layers and optionally some or all of the unit cells having at least one macropore in their outer layers. The implants can be loaded by injection with microfat, collagen, DCF, cells, bioactive agents, and other augmentation materials, prior to implantation.

Absorbable implants for breast surgery that conform to the breast parenchyma and surrounding chest wall have been developed. These implants support newly lifted breast parenchyma, and/or a breast implant. The implants have mechanical properties sufficient to support a reconstructed breast, and allow the in-growth of tissue into the implant as it degrades. The implants have a strength retention profile allowing the support of the breast to be transitioned from the implant to regenerated host tissue, without significant loss of support. Three-dimensional implants for use in minimally invasive mastopexy/breast reconstruction procedures are also described, that confer shape to a patient's breast. These implants are self-reinforced, can be temporarily deformed, implanted in a suitably dissected tissue plane, and resume their preformed three-dimensional shape. The implants are preferably made from poly-4-hydroxybutyrate (P4HB) and copolymers thereof. The implants have suture pullout strengths that can resist the mechanical loads exerted on the reconstructed breast.

Methods to fabricate objects by 3D printing of poly-4-hydroxybutyrate (P4HB) and copolymers thereof have been developed. In one method, these objects are produced by continuous fused filament fabrication using an apparatus and conditions that overcome the problems of poor feeding of the filament resulting from the low softening temperature of the filament and heat creep along the fed filament. Methods using an apparatus including a heat sink, a melt tube, a heating block and nozzle, and a transition zone between the heat sink and heating block, with the melt tube extending through the heat sink, transition zone, and heat block to the nozzle are disclosed. 3D objects are also printed by fused pellet deposition (FPD), melt extrusion deposition (MED), selective laser melting (SLM), printing of slurries and solutions using a coagulation bath, and printing using a binding solution and polymer granules.

Absorbable implants for breast surgery that conform to the breast parenchyma and surrounding chest wall have been developed. These implants support newly lifted breast parenchyma, and/or a breast implant. The implants have mechanical properties sufficient to support a reconstructed breast, and allow the in-growth of tissue into the implant as it degrades. The implants have a strength retention profile allowing the support of the breast to be transitioned from the implant to regenerated host tissue, without significant loss of support. Three-dimensional implants for use in minimally invasive mastopexy/breast reconstruction procedures are also described, that confer shape to a patient's breast. These implants are self-reinforced, can be temporarily deformed, implanted in a suitably dissected tissue plane, and resume their preformed three-dimensional shape. The implants are preferably made from poly-4-hydroxybutyrate (P4HB) and copolymers thereof. The implants have suture pullout strengths that can resist the mechanical loads exerted on the reconstructed breast.

Absorbable implants can be used to create volume and shape in the breast of a patient with regenerated tissue. The implants comprise scaffolds formed from layers of parallel filaments. The layers of filaments can be stacked and bonded together to form scaffolds with porous crisscross arrangements of filaments. The implant's scaffolds may be coated or filled with cells and tissues, including autologous fat graft, and/or a vascular pedicle may be inserted into the implant. The implants are particularly suitable for use in plastic surgery procedures, for example, to regenerate or augment breast tissue following mastectomy or in mastopexy procedures, and can provide an alternative to the use of permanent breast implants in these procedures.